Category: Industry

An old and unique technique with wood

With these walls your apartment becomes an eye-catcher. Wood has always a natural and cozy effect. Especially in combination with a fireplace. This effect makes it the ideal material for your home.

Shousugiban (Yakisugi): a special way to treat wood products

Shousugiban, actually called Yakisugi, is an old technique of the Japanese. With this technique, the wood gets a unique structure and a carbon footprint. This means that no wall can look like yours.



, ,

Japanese tradition inspires not only in Asia

Yakisugi comes from Japan and is a traditional method of wood preservation. By carefully charring the surface of the wood without burning the raw material, the wood becomes waterproof due to the carbonization and is therefore durable. The treated layer also protects against insects. In interior arches or furniture construction, a special fixation of this layer is used.
Einzigartiges Holzdesign findet immer mehr Liebhaber

This products pack with contract filling an packaging

Not only the development and production of one product is enough to successfully sell it. But one important aspect is missing, namely the right packaging. If you can not do this yourself, then contract filling an packaging is the right choice. What this is in detail, you can see in the following article.

This is contract filling an packaging

Developing and manufacturing a product is one thing, but a good product needs the right packaging. What is necessary for packaging depends essentially on the product. This can be very different. Starting with a liquid, over powder or solid parts in different sizes. If you can not pack your own products yourself, then contract filling an packaging is the right choice here. This is nothing else than the so-called contract bottling. This means that an external provider handles the provision and filling in suitable packaging. The service can be very different depending on the service provider.

Differences in contract filling an packaging

Contract filling an packaging can have many differences in service. This also depends on the service provider. Basically, the service can consist of pure bottling. The delivery, the collection, but also the packaging will be made available to the service provider. Alternatively, there are also providers who pick up the product to be packaged and also deliver again. There are also providers offering to design the packaging accordingly. For example, with important product information, but also with its own logo. The possibilities of the design, can be very different depending on the product and the associated packaging size. This is because a role is played by how big the packaging is. Depending on the size also results in different amount of space and thus also design options. Of course, it depends on the type of packaging. You have a variety of choices when filling products.

Cost of contract filling an packaging

Certainly, some readers who are considering the possibility of contract filling will now be interested in the costs. Basically, you can not quantify this but flat rate. It depends on what kind of services one uses from the service provider, but also in what quantity the filling takes place. Accordingly different here can be the cost of a bottling. This is why it is also recommended here, if you ask before the commission of a service provider, if you catch up on several offers. On the basis of several offers one has a possibility of comparison. Be it the costs, but also for example the service. So you can find the right supplier for contract filling an packaging.

Dry ice machine for cleaning

Motors, production parts and tools that are very dirty can be cleaned with a dry ice machine for cleaning. Even surfaces that are difficult to clean or sensitive surfaces can be cleaned without difficulty. The dry ice machine  for cleaning can be used the most diverse challenges. The machine weighs only 36 kilograms and works very efficiently and flexibly. The advantage is that the dry ice machine for cleaning can be used in any industrial environment.

The advantage is that this machine is quiet and can be used during operation. This eliminates the need for laborious cleaning at night or on weekends. In many companies like automotive industry or food industry the dry ice machine for cleaning does an outstanding job.

Dry Ice Machine for Cleaning – The New Generation

This machine has an innovative grinding system. You can adjust this individually and it grinds ice crystals between 0.2 and 3 millimeters depending on your needs. The advantage of the dry ice machine for cleaning is that the surfaces, whether smooth, coarse or finely structured, can be cleaned precisely and efficiently. The surface is not damaged or stressed. With the dry ice pellets, the pressure can be applied to any object, variably adjusted to the degree of soiling and the surface, no matter whether soft brass or hard steel. At the same time, the device also contributes to a considerate use of resources. In contrast to manual cleaning, the employees here spend little time on cleaning when working with the dry ice machine. The machine also does not have to be cleaned from the inside or outside. This is due to the low air and dry ice consumption. Therefore, long service lives are no problem with the dry ice machine for cleaning.

The advantages of the dry ice machine for cleaning

An advantage of the machine is the precise cleaning. Tools, machines and the like can be cleaned easily and cleanly. Another advantage is that the machine is very easy to operate. Intuitive menu navigation makes this possible. This dry ice machine is very versatile. It can be used individually in different industries. It can also be used during operation because it is quiet. This saves cleaning after work or on weekends. It has a very low compressed air and dry ice consumption. This is good for an all-round economical work. With this dry ice machine for cleaning you can carry out an environmentally friendly cleaning and this completely without chemicals. Dry ice frees the components from dirt that other machines cannot remove at any time and without interrupting the processes.

More information here:

Pipe clamps is designed to be used on any length

The clamps are brackets for piping on machinery, on supporting structures and on the structure. The term Bride is often used for pipe and mast clamps in the Swiss area as well. For tight pipe connections, the Briden are used and they have nothing to do with the pipe brackets.

What is to be considered for pipe clamps?

pipe_clampsGenerally there are many different designs. A distinction must be made between the one-piece and two-piece pipe clamps in the TGA area. TGA stands for technical building equipment. The pipe clamps can be made of plastic, stainless steel or steel. For pipe clamps, the type of material always depends on the material of the pipe. The steel models are available as uninsulated and soundproofed versions. The sound insulation is used for structure-borne sound decoupling and in many cases it consists of rubber. The pipe clamps usually provide a connection thread on the lower part if they are made of pressed sheet steel. The threads are then fixed with the help of the threaded rod or the threaded pin. The common sizes are M12, M10 and also M8. Graduated, many of the nuts often have two thread sizes. On one side there is the hooking hinge and so they come out opposite with the clamping screw. This can be done captive for ease of assembly, slide into the slot of the clamp shell and engage in a recess at the slot end.

Important information about the pipe clamps

The pipe clamps are suitable for the attachment of heavy, medium and light pipes made of different materials. There are always suitable models without and with sound insulation. Care is taken for perfect fixing of pipe diameters from 8 to 508 centimeters. There are models for a variety of conductive media and for different thread types. Additional safety can be guaranteed by noise protection and fire protection tests. There are also the tube snap clips, which are usually referred to as clamps. The models are made of plastic and the tubes are then covered by just over 180 degrees of the circumference. The models are predominantly used during assembly of the electric cables within the protective tubes. They are also used in plastic-aluminum composite or in light water pipes. For example, they are then made of polyamide. In the family house area, rainwater drop pipes and sewage pipes are often fastened with the light plastic pipe clamps. They are closed with a snap-on cap or with a screw. However, the traditional pipe clamps of rainwater drop pipes are made of the two halves, which are connected by a hinge and usually these are made of galvanized sheet metal. A coarse square nail is riveted in the middle of the back and this is then beaten in wood or masonry. The easy-to-handle and tool-free eyebolt can screw the rear and the front tab together.