Author: lj_oz48y733

Thin Stone – for single walls and use in the bathroom

Thon Stone Bathroom

Thin Stone panels, which can be used for wall cladding in living rooms, but also dining rooms, kitchens, bedrooms as well as in wet areas – are conventional slate blocks, which are split by hand into about 5 millimeters. It is an innovative technique that can produce plates that are 1.5 millimeters thick and are made by hand. The slate stone block, if this thin plate can be described as such, is provided with a liquid fiberglass carrier.

This is cured on the surface and with its help the wafer-thin rock layer is removed from the block. The fiberglass is ultimately also a decisive factor for the fact that the underside of the slate plate has a high degree of flexibility. Although the slate plate is not bendable around the corner or into a round to infinity, a curve of up to 5 centimeters is quite possible. This layer of slate, which is very thinly cut with a laser, can even be shaped completely three-dimensionally.

Good properties

Such wall cladding or floor cladding has excellent properties. For example, this product is extremely light and very flexible and offers a wide color spectrum with dozens of designs or decors. These products are based on excellent workmanship and a health safety of the products. The real stone surface of these products is also harmless to health and can be used in many ways indoors and outdoors and is therefore of high quality and worth its price. Thin stone is suitable for application to substrates such as wood, concrete, metal and tiles. Tailor-made laser cuts are also possible in the event that there are any niches in the apartment or house that should be filled. One of the characteristics of this type of wall cladding or floor cladding is that it has little abrasion and high resistance to environmental influences and a corresponding longevity. Showers – above the tiles – and the wet area in kitchens – on the wall behind the sink and the hotplates can also be covered with it. The advantage in these areas is above all that there can be no mold formation and grease deposit due to the non-existent joints. Look here: https://www.slate-lite.com/eng/thin-stone/

Beautification of the business premises

Business premises can also be embellished with the help of this very thinly cut slate with a laser. In addition to the wet rooms, which are also accessible to visitors, this also applies to the lobby – i.e. the central area where guests or clients of the company or the practice are received. And even in tea kitchens of a company, this type of wall cladding should not be dispensed with. Thin stone is easy to clean and is insensitive to grease splashes and moisture and looks very natural, because it is also a very natural material, which is only slightly reinforced with a liquid fiberglass carrier. Nevertheless, the production method is sustainable.

Industry

Clean more effectively with dry ice blasting

Blasting with dry ice is a very popular cleaning method. It offers many advantages, even if the cost of purchasing the right equipment is comparatively expensive compared to conventional high-pressure cleaners. However, you save on maintenance and also enjoy a very high level of cleanliness with minimal risk.

How does dry ice blasting work?

Dry ice blasting works, purely from an external point of view, similar to cleaning with the high-pressure cleaner. Only with the difference that in this case the dry ice comes from the spray head and no air with high pressure. In order to achieve the desired effect, the dry ice is electrically charged in the machine, ejected via the spray head and evaporates immediately after it has been released. This has the advantage that it is possible to clean much more gently and thus minimize the risk of damage. This method also offers many other advantages:

  1. Gentle cleaning even of very sensitive materials
  2. Point-accurate cleaning
  3. Significantly more effective cleaning for all common materials

The dry ice blasting can be used on almost all common materials. Whether glass, or high-quality stone or metal – this cleaning method convinces by its versatility in practical use and can almost always deliver perfect results. The high acquisition costs are really secondary compared to the result and can be more than impressive.

Cleaner more effectively with dry ice blasting

This can be cleaned much more effectively and at the same time more gently with the method of dry ice blasting, has now been proven. The highlight is that the dirt is virtually blown away, but is nevertheless removed very gently by the rapid melting of the dry ice. This advantage makes the method usable even for highly sensitive materials. The devices are so practical and handy that even a mobile use is conceivable and can be carried out at any time. The method is not yet so widespread, but it offers so many advantages that it seems to be only a matter of time before it will finally prevail. Dry ice simply offers too many advantages for it to be used in sensitive areas but also in everyday life. It is precisely the high effectiveness that makes the method the optimal solution in many areas. Whether on large areas, or for the small and very important details – the method convinces in practice and offers enormous advantages in direct comparison with conventional methods.

The cost-benefit ratio for dry ice blasting

Of course, costs and benefits play a major role in any major investment in operational resources. With this method, the acquisition costs are comparatively high, and currently the chemical mixture for dry ice also has its price. But the benefits cannot be easily dismissed out of hand. The additional charge, which the customer usually has to pay for this type of cleaning, can be explained very well by m with an almost perfect result. In addition, the devices for this method are now very reliable and can withstand all the demands of ongoing operation without major problems. This further minimizes operating costs and increases returns. Customers will be delighted with the result and will continue to want this method of cleaning in the future.

Where can dry ice blasting be used?

Almost everywhere. This method is versatile and can be used in virtually any situation and delivers optimal results.

How much does dry ice blasting cost?

From the customer’s point of view, the method is a little more expensive, but offers many advantages and is much more effective. From an operational point of view, the costs can be recovered quickly.

When is dry ice blasting the best solution?

For detailed work, this method is probably the best choice and offers many advantages. Even in very sensitive areas, this method can be made much further.

Clean more effectively with dry ice blasting

This method offers many advantages and is now indispensable in everyday life. Especially for demanding work, this method can always convince and always delivers perfect results.

Industry

An old and unique technique with wood

With these walls your apartment becomes an eye-catcher. Wood has always a natural and cozy effect. Especially in combination with a fireplace. This effect makes it the ideal material for your home.

shousugiban
Shousugiban (Yakisugi): a special way to treat wood products

Shousugiban, actually called Yakisugi, is an old technique of the Japanese. With this technique, the wood gets a unique structure and a carbon footprint. This means that no wall can look like yours.

 

Industry

, ,

Japanese tradition inspires not only in Asia

Yakisugi comes from Japan and is a traditional method of wood preservation. By carefully charring the surface of the wood without burning the raw material, the wood becomes waterproof due to the carbonization and is therefore durable. The treated layer also protects against insects. In interior arches or furniture construction, a special fixation of this layer is used.

nakamotoforestry.co.uk
Einzigartiges Holzdesign findet immer mehr Liebhaber

This products pack with contract filling an packaging

Not only the development and production of one product is enough to successfully sell it. But one important aspect is missing, namely the right packaging. If you can not do this yourself, then contract filling an packaging is the right choice. What this is in detail, you can see in the following article.

This is contract filling an packaging

Developing and manufacturing a product is one thing, but a good product needs the right packaging. What is necessary for packaging depends essentially on the product. This can be very different. Starting with a liquid, over powder or solid parts in different sizes. If you can not pack your own products yourself, then contract filling an packaging is the right choice here. This is nothing else than the so-called contract bottling. This means that an external provider handles the provision and filling in suitable packaging. The service can be very different depending on the service provider.

Differences in contract filling an packaging

Contract filling an packaging can have many differences in service. This also depends on the service provider. Basically, the service can consist of pure bottling. The delivery, the collection, but also the packaging will be made available to the service provider. Alternatively, there are also providers who pick up the product to be packaged and also deliver again. There are also providers offering to design the packaging accordingly. For example, with important product information, but also with its own logo. The possibilities of the design, can be very different depending on the product and the associated packaging size. This is because a role is played by how big the packaging is. Depending on the size also results in different amount of space and thus also design options. Of course, it depends on the type of packaging. You have a variety of choices when filling products.

Cost of contract filling an packaging

Certainly, some readers who are considering the possibility of contract filling will now be interested in the costs. Basically, you can not quantify this but flat rate. It depends on what kind of services one uses from the service provider, but also in what quantity the filling takes place. Accordingly different here can be the cost of a bottling. This is why it is also recommended here, if you ask before the commission of a service provider, if you catch up on several offers. On the basis of several offers one has a possibility of comparison. Be it the costs, but also for example the service. So you can find the right supplier for contract filling an packaging.

Dry ice machine for cleaning

Motors, production parts and tools that are very dirty can be cleaned with a dry ice machine for cleaning. Even surfaces that are difficult to clean or sensitive surfaces can be cleaned without difficulty. The dry ice machine  for cleaning can be used the most diverse challenges. The machine weighs only 36 kilograms and works very efficiently and flexibly. The advantage is that the dry ice machine for cleaning can be used in any industrial environment.

The advantage is that this machine is quiet and can be used during operation. This eliminates the need for laborious cleaning at night or on weekends. In many companies like automotive industry or food industry the dry ice machine for cleaning does an outstanding job.

Dry Ice Machine for Cleaning – The New Generation

This machine has an innovative grinding system. You can adjust this individually and it grinds ice crystals between 0.2 and 3 millimeters depending on your needs. The advantage of the dry ice machine for cleaning is that the surfaces, whether smooth, coarse or finely structured, can be cleaned precisely and efficiently. The surface is not damaged or stressed. With the dry ice pellets, the pressure can be applied to any object, variably adjusted to the degree of soiling and the surface, no matter whether soft brass or hard steel. At the same time, the device also contributes to a considerate use of resources. In contrast to manual cleaning, the employees here spend little time on cleaning when working with the dry ice machine. The machine also does not have to be cleaned from the inside or outside. This is due to the low air and dry ice consumption. Therefore, long service lives are no problem with the dry ice machine for cleaning.

The advantages of the dry ice machine for cleaning

An advantage of the machine is the precise cleaning. Tools, machines and the like can be cleaned easily and cleanly. Another advantage is that the machine is very easy to operate. Intuitive menu navigation makes this possible. This dry ice machine is very versatile. It can be used individually in different industries. It can also be used during operation because it is quiet. This saves cleaning after work or on weekends. It has a very low compressed air and dry ice consumption. This is good for an all-round economical work. With this dry ice machine for cleaning you can carry out an environmentally friendly cleaning and this completely without chemicals. Dry ice frees the components from dirt that other machines cannot remove at any time and without interrupting the processes.

More information here: http://white-lion.eu/en/main-menu/dry-ice-machine-for-cleaning.html

Pipe clamps is designed to be used on any length

The clamps are brackets for piping on machinery, on supporting structures and on the structure. The term Bride is often used for pipe and mast clamps in the Swiss area as well. For tight pipe connections, the Briden are used and they have nothing to do with the pipe brackets.

What is to be considered for pipe clamps?

pipe_clampsGenerally there are many different designs. A distinction must be made between the one-piece and two-piece pipe clamps in the TGA area. TGA stands for technical building equipment. The pipe clamps can be made of plastic, stainless steel or steel. For pipe clamps, the type of material always depends on the material of the pipe. The steel models are available as uninsulated and soundproofed versions. The sound insulation is used for structure-borne sound decoupling and in many cases it consists of rubber. The pipe clamps usually provide a connection thread on the lower part if they are made of pressed sheet steel. The threads are then fixed with the help of the threaded rod or the threaded pin. The common sizes are M12, M10 and also M8. Graduated, many of the nuts often have two thread sizes. On one side there is the hooking hinge and so they come out opposite with the clamping screw. This can be done captive for ease of assembly, slide into the slot of the clamp shell and engage in a recess at the slot end.

Important information about the pipe clamps

The pipe clamps are suitable for the attachment of heavy, medium and light pipes made of different materials. There are always suitable models without and with sound insulation. Care is taken for perfect fixing of pipe diameters from 8 to 508 centimeters. There are models for a variety of conductive media and for different thread types. Additional safety can be guaranteed by noise protection and fire protection tests. There are also the tube snap clips, which are usually referred to as clamps. The models are made of plastic and the tubes are then covered by just over 180 degrees of the circumference. The models are predominantly used during assembly of the electric cables within the protective tubes. They are also used in plastic-aluminum composite or in light water pipes. For example, they are then made of polyamide. In the family house area, rainwater drop pipes and sewage pipes are often fastened with the light plastic pipe clamps. They are closed with a snap-on cap or with a screw. However, the traditional pipe clamps of rainwater drop pipes are made of the two halves, which are connected by a hinge and usually these are made of galvanized sheet metal. A coarse square nail is riveted in the middle of the back and this is then beaten in wood or masonry. The easy-to-handle and tool-free eyebolt can screw the rear and the front tab together.